4045HFC06

4.5L Industrial Diesel Engine

Features

Series turbocharger

Fresh air is first drawn into the low-pressure turbocharger (fixed geometry) and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger (VGT or WGT), where the air is further compressed. The high-pressure air is then routed through a charge air cooler and into the engine’s intake manifold. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds — lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations, which results in higher power density, improved low-speed torque, and improved high-altitude operation

Cooled exhaust gas recirculation (EGR)

EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing Nox.

Diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR)

Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR)
These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). John Deere engines feature an SCR system that utilizes a urea-based additive,sometimes referred to as diesel exhaust fluid (DEF). The ammonia in the urea mixes with engine exhaust gases in the SCR catalyst to reduce NOx — converting it to nitrogen and water vapor.

High-pressure common-rail (HPCR) and engine control unit (ECU)

The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures up to 2,500 bar (36,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

4-valve cylinder head

The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response time by utilizing a cross-flow design.

Air-to-air aftercooled

This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

Compact size

Engine performance

John Deere electronic engine controls

Faster engine control unit (ECU) manages both the engine and the aftertreatment system
Four times the memory, twice the RAM and double the processing speed
The input/output capability has increased 40%
Premium software option integrates with equipment or vehicles to reduce engineering and installation costs

Additional features

Glow plugs
Air-grid heater
Gear-driven auxiliary drives
500-hour oil change
Self-adjusting poly-vee fan drive
Optional factory installed variable-speed fan drive improves fuel economy and reduces noise levels
R.H. or L.H. engine-mounted fuel filters
Low-pressure fuel system with electrical transfer pump and "auto-prime" feature

EPA Final Tier 4	-

Model	4045HFC06
Number of cylinders	4
Displacement - L (cu in)	4.5 (275)
Bore and Stroke-- mm (in)	106 x 127 (4.17 x 5.00)
Compression Ratio	17.2 : 1
Engine Type	In-line, 4-cycle
Aspiration	Turbocharged and air-to-air aftercooled
Length - mm (in)	870 (34.3)
Width - mm (in)	635 (25.0)
Height-- mm (in)	1130 (44.5)
Weight, dry - kg (lb)	570 (1257)

Intermittent - Rated power/Rated speed	129 kW(173 hp) @2200-2400rpm
Intermittent - Peak power	129 kW (173 hp) @ 2200-2400rp
Intermittent - Power bulge	0 %
Intermittent - Torque rise	667 Nm (492ft-lb) @ 1600rpm
Heavy Duty - Rated power/Rated speed	116 kW(156 hp) @2400rpm
Heavy Duty - Peak Power	116 kW (156 hp) @ 2400rpm
Heavy Duty - Power bulge	0 %
Heavy Duty - Torque rise	616 Nm (454ft-lb) @ 1600rpm
Continuous - Rated power/Rated speed	93-104 kW(125-139 hp) @2200-2400rpm
Continuous - Peak power	95-107 kW (127-143 hp) @ 1900-2100rpm
Continuous - Power bulge	0 %
Continous - Torque rise	494-601 Nm (364-443ft-lb) @ 1600rpm