Loading...
7 Locations Serving 57 Counties in PA & NY
New equipment
Windrowers and Draper PlatformsDraper
D600 Draper has an interchangeable rotary platform:
Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.
As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.
The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.
The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.
Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.
The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.
John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).
| Cutterbar - Type | John Deere double-cut knives: 10.2 cm 4 in. |
|---|---|
| Cut width (length) | 7.6 m 25 ft |
| Reel type | Hydraulic |
| Fingers | Plastic |
| Belt width | V-guided draper belt: 106.7 cm 42 |
| Platform length | - |
| Overall operating depth | - |
| Transport width, field position | - |
| Transport width on wheel, less dividers | - |
| Transport length, hitch extended | 9 m 29.6 ft |
| Platform Weight 5 Bat | - |
| Platform Weight 6 Bat | - |
| Platform Weight 9 Bat | - |
| Type | John Deere double-cut knives: 10.2 cm 4 in. |
|---|---|
| Cut width (length) | 9.1 m 30 ft |
| Knife drive | Standard: Single motor and knife drive Optional: Two hydraulic motors and two knife drives |
| Knife speed | 520 rpm |
| Stroke length | 98 mm 3.9 in. |
| Cutterbar tilt | Hydraulic, adjustable from cab |
| Guards | - |
| Hold Downs | - |
| Reel type | Hydraulic |
|---|---|
| Number of bats | Six |
| Fingers | Plastic |
| Diameter | 1118 mm 44 in. |
| Height control | Hydraulic, adjustable from cab |
| Speed control | Multi-function lever, in cab |
| Reel lift | Hydraulic, adjustable from cab |
| Reel fore and aft | Hydraulic, adjustable from cab |
| Reel resume | - |
| Reel reverse | - |
| Operating speeds | - |
| Operating speeds (54-inch reel) | - |
| Center tube diameter: all reel sizes | - |
| Finger Length | - |
| Finger Spacing (staggered on alternate bats) | - |
| Finger Tip Radius (adjustment range – factory assembled) | - |
| Span | - |
| Belt width | V-guided draper belt: 106.7 42 in. |
|---|---|
| Delivery opening width | Delivery, double swath opening: 137.2 cm 54 in. Delivery, single swath opening: 203.2 cm 80 in. |
| Delivery opening height | - |
| Cleat height | - |
| Draper drive | - |
| Operating speed | - |
| Speed control | - |
| Remote canvas speed control | - |
| Deck tilt | - |
| Deck extensions | - |
| Type | - |
|---|---|
| Header height sensing on the ground | - |
| Header height sensing off the ground | - |
| Type | Optional: Factory-installed cross-auger |
|---|
| Platform length | - |
|---|---|
| Overall operating depth | - |
| Operating width (field) | 9.1 m 30 ft |
| Transport width (reel fully retracted) | 2.6 m 8.5 ft |
| Transport width, field position | - |
| Transport width on wheel, less dividers | - |
| Transport height | 2.44 m 29.6 ft |
| Transport length, hitch extended | 10.5 m 34.6 ft |
| Approximate weight (base platform without reel) | 1232 kg 3513 lb |
|---|---|
| Approximate weight (base platform with reel) | 2710 kg 5975 lb |
| Approximate weight (with transport) | - |
| Platform Weight 5 Bat | - |
| Platform Weight 6 Bat | - |
| Platform Weight 9 Bat | - |
| Center opening width between belts | - |
|---|---|
| Back sheet opening | - |
| Deck shift / double windrow capability (manual / hydraulic / not available) | - |
| Gauge wheels | Optional: Adjustable castoring gauge wheel |
|---|---|
| Integrated slow speed transport system | Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table |
| Date collected | - |
|---|
| Center Link Extended | - |
|---|---|
| Center Link Retracted | - |
| Cutterbar Lift Range (measured at guard tip) (Center link fully retracted) | - |
| Guard Angle (cutterbar on ground) | - |
| Knife Sections | - |